|
BIS CODE : INDIAN STANDARD for
Structural Engineering
|
| IS:
800-1984 |
Code
for practice for general construction
in steel. |
| SP6
(1) |
Handbook
for structural steel sections. |
| SP:6(5)-1980 |
Hand
book for Cold formed, Light Gauge steel
structures. |
| SP:6(6)-1972 |
Handbook
for application
of plastic
theory in design of steel structures. |
| SP:6(4)-1969 |
Project
& Construction
Management for
Large Industrial
Projects. |
| IS:
206 -1992 (4th Rev) |
Tee
& strap hinges - Specification. |
| IS:
459 -1992 (3rd Rev) |
Corrugated
& non-corrugated asbestos cement sheets - Specification. |
| IS:
730 -1978 (2nd Rev) |
Hook bolts for
corrugated sheet roofing - Specification. |
| IS: 801 -1975 (1st Rev) |
Code of Practice
for use of cold - formed light gauge steel structural
members in general building construction. |
| IS: 802 -1977 (2nd Rev) |
Code of Practice
for use of structural steel in
(Part-1) overhead transmission line
towers - Loads
and permissible
stresses. |
| IS: 804 -1967 (1st Rev) |
Rectangular
pressed steel
tanks - Specification. |
| IS: 806 -1968 (1st Rev) |
Code of Practice
for use
of steel
tubes in general building construction. |
| IS: 808 -1989 (3rd Rev) |
Dimension
for hot rolled steel beam, channel and angle sections. |
| IS: 811 -1987 (2nd Rev) |
Cold
formed light
gauge structural steel section - Specification. |
| IS:813
-1986 (1st Rev) |
Scheme
of symbols for welding. |
| IS: 814 -1991 (5th Rev) |
Specification
for covered electrodes for manual metal arc
welding of
carbon & carbon manganese steel. |
| IS: 822 -1970 |
Code
of procedure for inspection
of welds. |
IS: 875 -1987(2nd Rev)
(Part 1)
(Part 2)
(Part 3)
(Part 4)
(Part 5)
|
Code of Practice
for design loads for buildings & structures.
Dead
loads
Imposed
loads.
Wind
loads.
Snow
loads.
Special
loads & load combinations.
|
| IS:1024 -1979 (1st Rev) |
Code of Practice
for use of welding in bridges and structures subjected to dynamic loading. |
| IS:1038 -1983 (3rd Rev) |
Specification
for steel
doors, windows & ventilators. |
| IS:1081 -1960 |
Code of Practice
for fixing & glazing of
metal doors, windows and ventilators. |
| IS:1148 -1982 (3rd Rev) |
Specification
for hot rolled steel
rivet bars (Up to 40 mm diameter). |
| IS:1161 -1979 (3rd Rev) |
Specification
for steel
tubes for structural purposes. |
| IS:1182 -1983 (2nd Rev) |
Recommended
practice for radiographic examination
of fusion
welded butt joints in steel plates. |
| IS:1254 -1991 (3rd Rev) |
Specification
- Corrugated aluminium sheet. |
| IS:1323 -1982 (2nd Rev) |
Code of Practice
for oxyacetylene welding
for structural work in in mild steel. |
| IS:1361 -1978 (1st Rev) |
Specification
for steel windows for
industrial buildings. |
IS:1363 -1992 (3rd Rev)
(Parts 2 & 3)
|
Hexagon
head bolts, screw and
nuts of product grade C-Screw (M5 to M64) |
IS:1364 -1992 (3rd Rev)
(Part 4)
|
Hexagon
head bolts, screws and nuts of product grade A and B - Thin nuts (M1.6 to
M64) |
| IS:1395 -1982(3rd Rev) |
Specification
for low & medium alloy steel covered electrode
for metal arc welding. |
| IS:1477 -1971(1st Rev) |
Code of Practice for painting offerrous
metal in buildings. |
|
(Part 1)
|
Pretreatment |
|
(Part 2)
|
Painting |
| . IS:2062 -1992 (4th Rev) |
Specification
for steel for general
structural purposes. |
| IS:3443
-1980(1st Rev) |
Specification
for crane rail section |
| IS:3548
-1988(1st Rev) |
Code of Practice
for glazing in buildings. |
IS:3600
Part 1 -1985
Part 3 -1984
Part 4 -1984
Part 5 -1983
Part 6 -1983
Part 7 -1985
Part 8 -1985
|
Method of testing
fusion welded joints
and weld metal in steel. |
| IS:3757
-1985(2nd Rev) |
Specification
for high
strength structural
bolts. |
| IS:3964
-1980(1st Rev) |
Specification
for light rails. |
| IS:4000
-1992 (1st Rev) |
High strength bolts
in steel structures. |
| IS:4049
-1988 (2nd Rev) (Part
1) |
Specification
for formed
ends for tanks
and pressure vessels. |
| IS:4260
-1986(2nd Rev) |
Recommended
practice for ultrasonic testing
of butt
welds in ferritic steel. |
| IS:4351
-1976(1st Rev) |
Specification
for steel door frames. |
| IS:5504
-1969 |
Specification
for spiral
welded pipes. |
| IS:5872
-1990(2nd Rev) |
Specification
for cold rolled steel |
|
strips. |
IS:6533
-1989(1st Rev)
(Part
1)
(Part
2)
|
Code of Practice
for design and construction of steel
chimney.
Mechanical
aspect
Structural
aspect
|
| IS:6623
-1985(1st Rev) |
Specification
for high
strength structural
nuts. |
| IS:6649
-1985(1st Rev) |
Specification
for hardened
and tempered
washers for high
strength structural
bolts and nuts. |
| IS:7205
-1974 |
Safety code for
erection of structural
steelwork. |
| .
IS:7215 -1974 |
Tolerances
for fabrication of steel structures. |
| IS:8500
-1991(1st Rev) |
Specification
for micro-alloyed structural
steel. |
|
IS:8629
-1977 Part
(1 & 3)
|
Code of Practice for protection
of iron
and steel structures from
atmospheric corrosion. |
| IS:9172
-1979 |
Recommended
design practice for corrosion
prevention of steel
structures. |
IS:9178
-1979
(Part
1)
(Part
2)
|
Criteria
for design
of steel bins
for storage of bulk materials.
General
requirements & assessment
of loads.
Design
criteria. |
| IS:9417 -1989 (1st rev) |
Welding
of cold
rolled steel
bars for reinforcement
concrete construction. |
| IS:12040-1987 |
Guidelines
for development of vendor rating systems. |
| IS:12843-1989 |
Tolerances
for erection
of steel structures. |
|
Free Engineering
Services by IIT Alumni Ranchi Chapter
|
