|
|
Beetle Project Page
Stage 1 - Pull Beetle from Lot and Clean It
The first step was to get the Beetle from the lot it was sitting in and back to our house. Then we cleaned out the inside and removed the headliner. Click on the pics below for a larger version.
Stage 2 - Remove Rear Fenders and Cut Body
Next we removed the rear fenders and cut the back end off just above the wheel wells. Click on the pics below for a larger version.
Stage 3 - Sand Body and Weld on Back End
Then we sanded down the body to prepare for the next step. We also welded on the new back end so that the car really began to take on its new shape. Click on the pics below for a larger version.
Sketch of Completed Project
Here is a drawing of what the completed beetle will hopefully look like. For a larger version just click on the picture.
|
|
