2cm FlaK38 on Chassis Panzer I Ausf.A

Manufacturer: HiPM/ADV-Azimut

Number: 35-001/35137

Comment: injection molded plastic, nearly all parts of base-kit (HiPM) need some work, fitting is not that good (HiPM), especially wheels and suspension are hard to make look ok, instructions ok, tracks made of single track links for idler wheel and drive sprocket, rest are fixed links in longer stripes. The track needs most re-work, to fit and to look ok (Horror!!). The conversion-set of ADV-Azimut is made from Resin and some PE-parts, some clean up needed on that parts, fitting is ok, instruction is bad, two serious ERRORS: -1.: in the original the front armor superstructure was moved forward a bit, so a large step occured between front hull armor and front superstructure -> this is missing in conversion-kit! -2.: no second seat beside that of the driver. Minor faults like no corrugated sheet metal side flaps, missing Notek-light and center fitting of the Flak (the original was placed a bit to the right!). No decals for the Fla.Btl.(mot)614, which you have to make yourself! The Flak isn't included in conversion kit and has to be purchased extra! (Best you use Tamiya's 2cm FlaK, cause you can use the included trailer to make the Sd.Ah.51 ammo trailer which was used by Flakpanzer I!)

Extraphotos:

back to Panzer I gallery

back to modelling mainpage

This page hosted by

Get your own Free Home Page

Manufacturer:	HiPM/ADV-Azimut
Number:	35-001/35137
Comment:	injection molded plastic, nearly all parts of base-kit (HiPM) need some work, fitting is not that good (HiPM), especially wheels and suspension are hard to make look ok, instructions ok, tracks made of single track links for idler wheel and drive sprocket, rest are fixed links in longer stripes. The track needs most re-work, to fit and to look ok (Horror!!). The conversion-set of ADV-Azimut is made from Resin and some PE-parts, some clean up needed on that parts, fitting is ok, instruction is bad, two serious ERRORS: -1.: in the original the front armor superstructure was moved forward a bit, so a large step occured between front hull armor and front superstructure -> this is missing in conversion-kit! -2.: no second seat beside that of the driver. Minor faults like no corrugated sheet metal side flaps, missing Notek-light and center fitting of the Flak (the original was placed a bit to the right!). No decals for the Fla.Btl.(mot)614, which you have to make yourself! The Flak isn't included in conversion kit and has to be purchased extra! (Best you use Tamiya's 2cm FlaK, cause you can use the included trailer to make the Sd.Ah.51 ammo trailer which was used by Flakpanzer I!)
Extraphotos: