NetBSD 1.4.1 (BIGBIRD) #0: Thu Dec 23 21:51:17 JST 1999 toshi@bigbird:/usr/src/sys/arch/i386/compile/BIGBIRD cpu0: family 5 model 8 step 1 cpu0: Intel Pentium (586-class) real mem = 66781184 avail mem = 59973632 using 840 buffers containing 3440640 bytes of memory mainbus0 (root) pci0 at mainbus0 bus 0: configuration mode 1 pci0: i/o enabled, memory enabled pchb0 at pci0 dev 0 function 0 pchb0: Toshiba Info Systems (2nd PCI Vendor ID) product 0x0601 (rev. 0xa2) vga0 at pci0 dev 4 function 0: Neomagic product 0x0004 (rev. 0x01) wsdisplay0 at vga0: console (80x25, vt100 emulation) ohci0 at pci0 dev 11 function 0: NEC product 0x0035 (rev. 0x02) ohci0: interrupting at irq 11 ohci0: OHCI version 1.0 usb0 at ohci0 uhub0 at usb0 uhub0: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered Toshiba Info Systems (2nd PCI Vendor ID) product 0x0701 (miscellaneous communications, revision 0x23) at pci0 dev 17 function 0 not configured isa0 at mainbus0 com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo wdc0 at isa0 port 0x1f0-0x1f7 irq 14 wd0 at wdc0 channel 0 drive 0: wd0: drive supports 16-sector pio transfers, lba addressing wd0: 4126MB, 8944 cyl, 15 head, 63 sec, 512 bytes/sect x 8452080 sectors wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 pckbc0 at isa0 port 0x60-0x64 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard pms0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pms0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: sysbeep0 at pcppi0 isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support npx0 at isa0 port 0xf0-0xff: using exception 16 fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2 fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec pcic0 at isa0 port 0x3e0-0x3e1 iomem 0xd0000-0xd3fff: using irq 3 pcic0: controller 0 (Intel 82365SL Revision 1) has sockets A and B pcmcia0 at pcic0 controller 0 socket 0 pcmcia0: CIS version PCMCIA 2.0 or 2.1 pcmcia0: CIS info: NTT Personal, Paldio DataFax Card, DC-2S(II) pcmcia0: Manufacturer code 0xb0, product 0x0 pcmcia0: function 0: serial port, ccr addr 200 mask f pcmcia0: function 0, config table entry 32: I/O card; irq mask 86b8; iomask b, iospace 3f8-3ff; powerdown pcmcia0: function 0, config table entry 33: I/O card; irq mask 86b8; iomask b, iospace 2f8-2ff; io8 powerdown pcmcia0: function 0, config table entry 34: I/O card; irq mask 86b8; iomask b, iospace 3e8-3ef; io8 powerdown pcmcia0: function 0, config table entry 35: I/O card; irq mask 86b8; iomask b, iospace 2e8-2ef; io8 powerdown com2 at pcmcia0 function 0 port 0x2f8-0x2ff: serial device com2: ns16550a, working fifo pcmcia1 at pcic0 controller 0 socket 1 pcmcia1: CIS version PCMCIA 2.0 or 2.1 pcmcia1: CIS info: IO DATA, PCETTX, Fast Ethernet pcmcia1: Manufacturer code 0x149, product 0x230 pcmcia1: function 0: network adapter, ccr addr 400 mask b pcmcia1: function 0, config table entry 32: I/O card; irq mask befc; iomask 5, iospace 0-1f; mwait_required rdybsy_active wp_active bvd_active io16 irqlevel IO DATA, PCETTX, Fast Ethernet (manufacturer 0x149, product 0x230) function 0 not configured isapnp0: no ISA Plug 'n Play devices found apm0 at mainbus0: Power Management spec V1.1 apm0: battery life expectancy: 100% apm0: A/C state: on apm0: battery charge state: high apm0: estimated 58m biomask 4840 netmask 4840 ttymask 584a wscons: wskbd0 glued to wsdisplay0 (console) boot device: wd0 root on wd0a dumps on wd0b root file system type: ffs pcmcia0: card irq 5 stray interrupt 5 wsdisplay0: screen 1 added (80x25, vt100 emulation) wsdisplay0: screen 2 added (80x25, vt100 emulation) wsdisplay0: screen 3 added (80x25, vt100 emulation) wsdisplay0: screen 4 added (80x25, vt100 emulation) apm0: battery life expectancy: 100% apm0: A/C state: on apm0: battery charge state: high apm0: estimated 1h 1m