1. I used a precoat scratch remover. This
allowed me sand away and unwanted scratches so that when I allpy the final
paint, it won't be lumpy and bumpy.
|
|
2. Here's the first coat of paint. Not really smooth yet, but getting there.
3. I then sanded the first coat and repainted a second one.
4. I sanded and repainted until the 5th coat was added.
|
|
5. Here's the final product. I did the same steps with the yellow roof, but the roof was only 2 coats.
|
|
Tips:
Always use rubber/latex gloves
Spraypaint in a well ventalated area
Do Not inhale paint!!!!!!
Allow 30 minutes in between coats (1 hour if you're sanding)
Use masking tape that is recommended for paints.
Carefully mask areas.
When spray painting hold the can about 10-15cm away from the car.
Aim spraycan first then spray.
It takes time, so be patient.
|
|