Build Servo
I will post pictures here as soon as I can.
Take your executive snack dispenser. Cut off the black handle and remove the globe. Drill a small hole and place a small eye screw in the top. Put some string through a hole on the inside of the lever and feed it through the eye screw.
Modify a 1/2" pvc tee. Cut in the middle and on the sides. Glue it in with hot glue or epoxy.
Now take your hoverskirt bowl. Place your vacuformed turbo trains evenly around it. Attach them with either small nuts and bolts or hot glue.
Glue a gumball machine cap onto the top and put the globe in it.
Take your pipe insulation and put it around the bottom of the skirt. Attach it.
Next, put your barrel on the hover skirt and attach it with screws. Then drill a 7/8" hole through both . Drill a corresponding hole on the top.
Attach a 3" lazy susan turntable bearing to the top. Attach your flashlight head shoulders to the sides of the barrel with screws.
Glue your moonie shoulders to the flashlight heads. Attach your spring arm to the moonie arm and put the hands on the springs.
Feed a length of 1/2" pvc through and attach the head
There you have it.
For some helpful tips for Servo, Click here.