steering wheel

MAKING THE

STEERING WHEEL

I MADE LOT OF DRAWINGS AND PICKED A

BANJO TYPE DESIGN

FIRST I LAY IT OUT

ON A 1/2 INCH PLYWOOD

BOARD

THEN I CUT IT OUT

NEXT I ROLL A THIN WALL TUBE AROUND IT

MAKEING SURE NOT TO KINK IT

NOW I HAMMER A METAL TOP

AND BOTTOM FOR THE CENTER

NEXT I WILL CUT THE 3/16 ROUND

BAR STOCK FOR THE SPOKES

THIS IS THE PARTS FOR THE WHEEL 12 SPOKES,

3 RETAINERS , RIM, AND CENTER.

ALL THE HOLES ARE DRILLED AND READY TO PUT TOGEATHER

ALL WELDED JUST NEED TO FINISH

THE DASH PANEL

IN A FEW DAYS I'LL HAVE IT ASSEMBLED

DROP BY....OK?