THIS IS A VERY INEXPENSIVE WAY TO KEEP AN EYE ON YOUR TEMP. AS MOST OF YOU BANSHEE OWNERS KNOW, THE BANSHEE LOVES TO OVERHEAT, BOILING COOLANT ALL OVER YOUR PIPES. YOU CAN PURCHASE A REGULAR AUTO TEMP GAUGE, AND SOME FITTINGS FROM YOUR LOCAL PLUMBING STORE FOR UNDER 20 BUCKS. IT'S A VERY CONVIENIENT WAY OF KNOWING WHEN TO SHUT DOWN, AND LET YOUR MACHINE COOL DOWN FOR AWHILE. ALSO REMEMBER THAT A COOL MOTOR GIVES YOU MORE HORSE POWER!!

HERE YOU CAN SEE THE TEMP GAUGE CLOSE UP. YOU CAN ALSO WIRE THE GAUGE TO THE LIGHTS, AND IT WILL LIGHT UP AT NIGHT WHEN YOU HAVE YOUR LIGHTS ON. ALSO NOTICE THE RELOCATION OF THE IGNITION.

THIS IS A PICTURE OF THE PLUMBING THAT'S  INVOLVED. YOU NEED TO GET A   T-CONNECTOR, AND ALL REQUIRED FITTINGS TO MATCH THE END OF THE TEMP GAUGE ITSELF. YOU ALSO NEED TO REMEMBER TO USE THE TEFLON TAPE WHEN PUTTING ALL OF THIS STUFF TOGETHER. YOU NEED TO REMOVE A COUPLE OF INCHES OF THE STOCK HOSE, AND REPLACE IT WITH THIS.

BACK