QUERY VIDEO UTILITY This application consists of one runfile: QueryVideo.Run Product Name : Query Video Supported On : B24, B26, B27, B28, B38, B39, and all SuperGen hardware Supported OS : BTOS II, CTOS I, CTOS II, CTOS III Description : The Query Video utility will display hardware information, video display information, palette information, and the contents of the Video Control Block (VCB). Directions/Use : To run the Query Video utility, execute the /Query Video command from an exective partition. The use of this utility is self-explanatory. The following are sample displays taken when executing this tool on a B28-CPU: ************************************************************************** O P T I O N S 1- Workstation's Diagnostics. 2- Query Video Hardware. 3- Video Control Block.(VCB) 4- Color Palette Format. 5- Exit. INPUT YOUR ANSWER >>> ========================================================================== ********************* WORKSTATION'S DIAGNOSTICS ********************** OS Version: Release.Version: 11.7 Protected Mode BTOS II 3.2 Processor: Processor: 80286 No Math CoProcessor or An Emulator Exists. Module IDs: X-Bus: 8 Mhz 80286 CPU (CP-002,CP-0A2,B28) Unknown: Dual Floppy Disk (B24-M1,FD-001,FD-0A1) I-Bus: Monitor K2, Keyboard Video: Level of Video Capablity = 4 >> Character Map Workstation << Maximum Number of Lines = 29 Number of Columns in Narrow Mode = 80 Number of Columns in Wide Mode = 80 Level of Bit Map Capability = 0 >>None Number of Pixels, Vertically. = 0 Number of Pixels, Horizontally. = 0 Character Cell Height, in Pixels = 12 Character Cell Width , in Pixels = 9 Number of Graphic Planes = 1 Number of Colors Supported = 2 fBackgroundColor Flag is FALSE, Background Color Capability is OFF. Video Software Release Version(VAM) = 3.2 ************************ Query Video Hardware**************************** Level of Video Capablity = 4 >> Character Map Workstation << Maximum Number of Lines = 29 Number of Columns in Narrow Mode = 80 Number of Columns in Wide Mode = 80 Level of Bit Map Capability = 0 >> None Number of Pixels, Vertically. = 0 Number of Pixels, Horizontally. = 0 Segment Address of the Memory Segment that is Assigned to the Bit Map. = 0h Input/Output Port of the Graphics Board Memory = 0h Number of Bytes in One Raster Line for a Bit Map Video Display. = 0 Character Cell Height, in Pixels = 12 Character Cell Width , in Pixels = 9 Wide Mode's Character Cell Width in Pixels = 9 Memory Address of the Bit Map Structure = 0000:0000h Memory Address of the Font Currently Being Used by the Video Display = 0070:2000h Number that is Assigned to the Module Controlling the Video Display (X Bus) = 0 Number that Specifies the Position of the Video Display Controlling the X-Bus Module = 0 I/O Port Address that Provides Access to the Video Display Controlling Module = 0 Offset of the First Character Cell in a Video Display from the Top of the Display = 0 Offset of the First Character Cell in a Video Display From the Left Side of the Display in Narrow Mode = 0 Offset of the First Character Cell in a Video Display from Left Side of the Display in Wide Mode = 0 Ratio Between X and Y Physical Screen Dimensions. = 32768:23756 (1.379357) Number of Graphic Planes = 1 fColorMonitor Flag is FALSE. Mono Monitor. Number of Colors Supported = 2 fBackgroundColor Flag is FALSE, Background Color Capability is OFF. fHardwareCharMap Flag is TRUE, This is a Character Mapped Workstation. Maximum Number of Lines for Monitors Capable of Changing the Number of Lines = 29 Character Cell Height in Pixels for Workstations with the Ability to Change Character Height. = 12 Video Software Release Version(VAM) = 3.2 fGenericColor Flag is TRUE. Hardware Supports the Single Palette Format, Returned by the ProgramColorMapper Operation. fVariableCharMap Flag is FALSE. The Resolution of the Display Will NOT Change When There is a Change in the Line Mode and the Hardware Does Not Reformats the Character Map. fMultiSystemFonts Flag is FALSE, Only One System Font is Supported. fUseWsLine Flag is FALSE. Use sLine in the Vido Control Block(VCB). Maximum Number of Color Levels per Primary Color(Red, Green or Blue) Offered by a Color-Mapped Graphics Controller in Combination with the Monitor to Which It is Connected. = 3 fWhiteBackground Flag is FALSE. The Default Background Screen is Black. Number of Raster Lines Below the Display Bit Map. = 0 *********************Video Control Block (VCB)************************** Level = 4 The Level of Video Capability. fCharAttrs Flag is TRUE, Character Attributes Enabled. fReverseVideo Flag is FALSE, Reverse Video Disabled. fHalfBright Flag is FALSE, Half-Bright Disabled. pMAP = 0070:0000 Address of Character Map. sMAP = 4640 Character Map Size. cFrames = 8 Number of Frames Set at System Build. cColsMax = 80 Screen Width. cLinesMax = 29 Screen Height. sLine = 160 Bytes Required for One Character Map Line. DefaultWindowId = 0 Default Window Identification Number. bSpace = 0 Character Code of Empty Space on Screen. SAR = 1 Contents of Screen Attribute Register. nPixelsWide = 0 Width in Pixels of the Bit Map. nPixelsHigh = 0 Height in Pixels Wide of the Bit Map. wsLine = 160 Same as sLine but is a Value for All Systems. nPlanes = 0 Number of Planes used for Color Graphics. fBackgroundColor Flag is FALSE, Background Color Mode is Off. cLinesMaxScreen = 29 Maximum Lines Displayed in this Mode. fHardwareCharMap Flag is TRUE, There is a Hardware Character Map. **************************Color Palette Format************************** GraphicsPalette = 2, Second Graphics Palette (rgbGraphics2) is Selected AlphaEnabled = 1, Enabled. AlphaColorEnabled = 2, Disabled. GraphicsEnabled = 2, Disabled. GraphicsColorEnabled = 2, Disabled. bFormat = 0, Three Palette Format. wIndexStart = 0 COMMAND /Query Video