PORT TEST UTILITY
                    Release Level YAD-8/6-9:30 




This application consists of one runfile: PortTest.Run

Product Name   : Port Test
Supported On   : B24, B26, B27, B28, B38, B39, and all SuperGen hardware
Supported OS   : BTOS II, CTOS I, CTOS II, CTOS III

Description    : The Port Test application is designed to test a designated 
                 port's ability to transmit and receive data.

Directions/Use : To run the Port Test utility, execute the /Port Test 
                 executive command, using the following parameters which are 
                 detailed and described below:
                 
                 [Port ([Comm]A) ]
                 
                 This field is optional.  Enter the port designation which is 
                 to be tested.
                 
                 [baudrate (9600)]
                 
                 This field is optional.  Enter the baudrate setting.
                 
                 [databits (8)   ]
                 
                 This field is optional.  Enter the databits setting.
                 
                 [Parity n/o/e (n)]
                 
                 This field is optional.  Enter the parity.
                 
                 [StopBits 1/2 (!)]
                 
                 This field is optional.  Enter the number of StopBits.
                 
                 [FlowCtrl Cts/None (Cts)]
                 
                 This field is optional.  Enter the FlowCtrl setting.
                 
                 [Password]
                 
                 This field is optional.  Enter the Volume password where the 
                 transmit/receive files are to reside.
                 
                 [Rx (y <file> <VerifyString>)]
                 
                 This field is optional.  The default is an internal buffer.  
                 To receive into a file enter: y filename.  To verify 
                 reception of a string, repeatedly, enter: y '' stringtext.
                 
                 [Tx (y <file> <DefaultString>)]
                 
                 This field is optional.  The default is an internal string.  
                 To transmit a file, enter: y filename.  To transmit a string 
                 repeatedly, enter: y stringtext.

                                 
COMMAND
          
/Port Test
  [Port ([Comm]A) ]
  [baudrate (9600)]
  [databits (8)   ]
  [Parity n/o/e (n)]
  [StopBits 1/2 (!)]
  [FlowCtrl Cts/None (Cts)]
  [Password]
  [Rx (y <file> <VerifyString>)]
  [Tx (y <file> <DefaultString>)]