Help Wanted!  Help crack these tough problems - read them and use the link to send an e-mail.  I hope to post a fix once I hear the problem is solved.
 

• Help! Problems pushing K6 266 past 300MHz 

Got some problem in overclocking though... 

- cannot work on 2.1V core (11-12), I used instead 2.3V(11-12,9-10) - able to run k6-266 & k6-300, but at 337 post can detect but pc hangs-up halfway either at memory check or at win95 start-up screen 
Tried increasing to 2.4V but same result - of course, tried 375 but not successful...maybe the CPU is of  lower quality (manufactured in malaysia). 

Just for your Info, my PC config are as follows : 
- FIC PA-2007 rev 1.2 
- k6-266 CPU 
- 128 MB EDO 60ns Hyundai Rams 
- Matrox Mystique 4MB SGRAM 
- Adaptec 2940UW bios rev 1.25 
- Quantum FB SE 4.3G IDE 
- Quantum Atlas II 4.3G SCSI 
- Creative Awe64 Soundcard 

Any suggestions on how to push the system to 337? I was actually prepared for higher o/c ...got a bigger heat sink with silicon heat sink compound added, also added additional 12V fan at casing near CPU..but I guess I was too optimistic. 

Many Thxs & Best Regards, 
suhaimi