\\220. RAS clients getting disconnected...
A. device.log in the registry
\\199. You have a set of users using 3rd party PPP clients and a set of users that need secure access to a SQL
database thru RAS; how do u configure RAS?
\\198. RAS configured with TCP/IP, NETBEUI, IPX/SPX, what can you access?
A. Winsock apps, NETBIOS apps, Resources on RAS server
\\188. You RAS clients complain that there RAS connection disconnect every time after they connected. What
can you do to find the problem ?
Answer: Enable Device logging in the registry to create a device.log file
\\182. RAS connection fails, where do you look.?
A) answer for this is Device.log
155. How can you configure the highest level of security in a RAS Server with clients dial in from
DOS with DES Encryption and Windows 95 clients?
\\197. What will allow Netware clients to use NETBIOS apps?
A. NWLink ONLY !!!
\\150. You have MS Client and Non-MS Clients dialing into a RAS server and you need encryption for both. How
do you accomplish?
A: Setup one modem port with MS-CHAP and have MS clients dial-in there and setup another port with
CHAP and have third party clients dial-in there.
\\186. There is 20 NTW in a workgroup called SALES, You want to add a NT Server as a PDC called SALES.
What do you need to do
Answer: Create a user account for each user on the PDC
187. You want to install two printer in a POOL on the PDC. Which off the following apply.
Answer: Printers must use the same drivers.
111. What RAS encryption authentication method handles DES?
A: MS-CHAP
92. What are the RAS security protocols?
A: Clear-text
PAP
CHAP
MS-CHAP.
93. Can you connect to a RAS Server if you are running the SLIP protocol?
A: NO
94. Connecting to a Netware server through a RAS Server. What do I need?
A: NWlink including RIP for IPX/SPX
65. How to invoke RAS dialer.log and where is it stored?
A: Registry entry - \winnt_root~system32\ras
\\76. You have a RAS server with NT Workstation remote users who need access to another server
and encryption. Other remote Win 95 clients don't need encryption. What do you do?
A: Set up second RAS port on server and configuring for encryption.
\\95. Can a WIN95 client import Replication?
A: NO
96. How do you Extend a Volume set ? and will Data be lost?
A: No, no data lost. Disk Administrator, click on partition to be extended. Now hold CTRL and free partition
and next: extend volume set. Reboot. There will be something about CHKDSK on the blue screen and then
it's done. No formatting needed
61. Unsupported internal modem, how do you configure it?
A: Add modem calls to modem. Inf file
62. If you make changes to installed services, where will it be updated in the registry?
A. HKEY_Local_Machine
63. Replication Governor is configured in registry, what will it do?
A: Decrease buffer size calls from BDC to PDC Decrease frequency calls from BDC to PDC
\\71. You want to perform a tape backup of the registry files of the Windows NT Server. How must
you use the Windows NT Backup program to do this?
A: Specify at least one file on the volume that contains the registry.
\\73. You are the network administrator for Acme Inc., which has two NetWare 3.12 servers and one
NetWare 4.1 server. The Network number used on the 3.12 servers is 00000312 and 00000041 on the
4.1 server. The frame type used on the NetWare 3.12 servers is 802.3 and 802.2 on the NetWare 4.1
server. How must you configure NWLink on the NT Server so that all the NetWare clients have
access to the NT server?
A: By selecting the Manual Frame Type Detection option and adding the NetWare 3.12 and 4.1 clients'
network numbers and frame types to the frame type configuration list
74. Do you need to stop server services when backing up registry?
A: Not if you're using ntbackup.
\\77. Best way to promote a BDC to a PDC?
A: Shutdown PDC and promote BDC, former PDC will automatically be demoted to BDC upon startup
83. A printer has stopped working. It is connected to your NT Server. You want to move the queued print files
to the network directory. How?
A: Reconfigure ports of the NT Server printer to the new UNC name
\\95. Can a WIN95 client import Replication?
A: NO
96. How do you Extend a Volume set ? and will Data be lost?
A: No, no data lost. Disk Administrator, click on partition to be extended. Now hold CTRL and free partition
and next: extend volume set. Reboot. There will be something about CHKDSK on the blue screen and then
it's done. No formatting needed
98. How do you stop users from authenticating or using a PDC when upgrading a BDC to a PDC?
A. STOP Servers services
100. Your main file server is running slowly. You run the Browser Monitor utility from the Resource Kit and
discover that it is currently the browse master. How can you configure the system to ensure that this
machine is never the browse master?
A: Set the registry entry MaintainServerList=No
101. How would you start an application called flopscan.exe with a higher priority than other applications?
A: From the command prompt, type start /high flopscan.exe
\\102. You want to create a Windows NT print queue for a Hewlett Packard laser printer which is directly
connected to the network through a Hewlett Packard JetDirect interface card. What action must you take
before you attempt to create the printer queue?"
A: Install support for the Hewlett-Packard network port (check this)
\\103. Your Windows NT network uses the TCP/IP protocol exclusively. There is no WINS server on
the local network, but you want to connect to a share located across a router. How can you do this?
A: Add an entry for the remote host to the LMHOSTS file
104. You want a user to automatically execute a batch file at login time. Which of the following steps do you
need to complete?
A: Create a batch file called login.bat and place it in the winnt\system32\repl\import\scripts directory; in
User Manager set 'login, bat' as the user's login script
105. You have recently installed a second processor in your Windows NT server to improve performance.
What action should you take to configure Windows NT appropriately?
A: Run the uptomp exe utility from the Resource Kit
\\108. You have 1 NT Server with 2 LAN segments. Each segment has 100 client PCs. The client PCs and the
NT Server use TCP/IP as their sole protocol. You want the NT Server to be able to route messages
between the 2 segments. What do you do?
A: Enable IP routing
109. You have several NT Workstations that belong to a domain, these NT Workstations have resources (file
directories, printers, etc.). You want some users of the domain to gain access to the resources in the
Workstations. What do you do?
A: Create local group on Workstation and add Domain Users global group
112. Domain E trusts Domain N. You create a local group in Domain E. What can this group contain?
A: Users from Domain N
Global groups from Domain N
Global groups from Domain E
Users from Domain E
\\115. You have a WFW computer and you want to remotely administer domain user accounts. What
is the best way to do this?
A: Install WIN32s and then install Client Admin Tools
118. If someone deletes a file accidentally, do they have to be in the Backup Operator or owner to
be able to restore file from tape?
A: No, Administrators, Backup Operators, Server Operator and anyone else who has "restore file" rights
can do it.
119. Which variable in the registry do you change to slow down replications of accounts?
A: Increase pulse or decrease pulse concurrency in registry.
122. How do you set up the browser to send browse information to a LAN manager 2.x system?
A: Check the appropriate box on Control Panel/Network/Services/Server/Properties.
\\124. You want to add a third HP printer to a printer pool, what do you need to do. Create printer, install driver,
others?
A: Use Properties/Port option and add new printer to a new port.
127. Who can "take ownership" of files?
A.' Administrators , Anyone with FULL CONTROL , Anyone with the SPECIAL PERMISSIONS
128. How do you assign IP addresses dynamically to RAS users (through the RAS server or by using DHCP)?
A: Either
129. How do you edit user profiles in NT 4.0 Server?
A: Control Panel/System icon
\\130. Can you create a boot diskette for booting the system to the mirror partition using DOS?
A. No, must use NT
\\132. You need to create the 3 setup disks. Do you format the floppy from a MS-DOS computer or a Windows
NT computer?
A: DOS
134. How do you change foreground and background priorities in NT?
A: In the System Properties dialog box
136. How do you convert a FAT partition to NTFS?
A: Type "convert drive: /fs:ntfs" at command prompt
138. What program do you use to read *.dmp files?
A: Dumpexam. exe
\\139. You have a network that uses IPX/SPX.. Half uses 802.3 and the other half uses 802.2. You add
a computer running WinNT Server with 1 network adapter installed. How can all clients running
IPX/SPX access the NT Server?
A: First install a driver for 802.2 and then install a driver for 802.3 to the same network adapter.
141. If you want to create a printer pool, what must be the same between both printing devices?
A: Must use same device driver.
144. You replaced one SCSI hard disk after a mirror set up failure. What else would you do?
A: Break mirror and "establish mirror "in Disk Manager option.
146. Where do you place files that you want to export from the PDC to the BDCs?
A: Subdirectories of the winnt\system32\repl\export directory
\\148. You have a group of users who need to copy 100mb of files to an NT server, but this action causes the
network to slow down. What should you do?
A. Install second NIC and enable IP routing.
158. You have a PDC called Main1. You install a member server with a share called PAYROLL.
The global group ACCTMGRS from PDC need to access this share (PAYROLL). How you manage?
A: Create a local group on member server called FINANCE and add the A CCTMGRS global group into
FINANCE and grant the FINANCE group permission.
\\159. You want to monitor TCP/IP activity on 3 NT server, What would you install?
A: SNMP on each servers
\\160. You install Admin Tools on 95 machine, where you manage printer security?
A: Windows Explorer
161. Your Installing NT Server and your non-SCSI CD-ROM not detected, what should you do?
A: Run Installation again and select "S" to specify detection additional devices.
\162. The Directory Replicator Service on the PDC is configured as shown in an exhibit. Which computers will
receive replicated files from the PDC? (Choose all that apply) On the exhibit you see the following: A
window named "Directory replication on NTSERVER1", a "X" in Export Directory To: DOMAIN 1
A: All the BDCs that are configured to import from the PDC
All Member Servers that are configured to import from the PDC
All NT Workstations that are configured to import from the PDC
\\163. You install a RAS server on your network. Remote users will use Window NT Workstation computer with
Dial-Up Networking to access a database. The database is stored on a different Window NT Server
computer from RAS server. You want to use data encryption to provide security for information that is
transmitted to and from the database via Dial-Up Networking. Users of other client computers, which use
3rd PPP software, need access to the RAS server to run application other than the database. These client
computer do not support data encryption. How can you support this configuration ?
A.Configure the RAS server to request data encryption for only Window NT Workstation computer.
Configure the server that contains the database to request data encryption for remote users.
B.Configure the RAS server to request data encryption for specific modem port. Configure the Window
NT Workstation computer to dial in to modems attached to only these ports.
C. Configured the RAS server to request data encryption for specific users accounts
D.Configure the RAS server to allow access for all remote users. Configure the server that contain the
database to request data encryption for remote users.
\\165. Upgrade nt3.51 to nt4.0. while preserving all the settings How to do it? Choose 2 answers.
(1)I chose boot from dos and run winnt.exe andinstall it to the same directory as nt3.51
(2) boot from 3.51 and run winnt32.exe and install nt to the nt3.51 directory.
\\166. You have an WinNt Server that runs IPX, and you have a NetWare client What will the client be able to
access?
A. Client/server applications that support NetBIOS
\\167. How would you install Win95 over a network?
a. Share Win95 Installation files
b. Make Win95 installation startup disk with Network Client Administrator
c. Make Installation disk set with Network Client Administrator
d. Boot up using startup disk
e. Install using disk set
A. a,b,d (you make installation startup disk and boot from it -- not disk set)
\\171. You have 4 Domain Controllers and want to Administrators receive alerts when a system errors occurs:
A. In each Server put all names in Server Manager
\\172. How do you manage printer permissions from a remote windows 95 client
A) Answer to this was "Explorer" you can take my word for this or check it out in sybex test success book.
176. NT Server connected to UNIX, want to use HP Printer connected to UNIX machine, NT clients will be
running NWLink. What other protocols need to be running?
A. TCP/IP & IPX
179. How can you minimize memory usage when there are less than 10 users connected?
A) The answer to this is "server service".
\\204. What systems can import?
A. ONLY NT systems(server or workstation)
\\209. You have a network consisting of NT servers and NetWare servers. Your NetWare clients are using a
Visual Basic application that access a SQL database on one of the NT servers. What else must you install
on the NT server containing the database so th
A.All you need is the NWLink protocol on the server because the clients are accessing it for application
services.
210. You are installing a DHCP server. What TCP/IP related components can you specify for your clients?
(select all that apply)
a) Default gateway
b) WINS server
c) DNS server
d) FTP server
e)Subnet mask
A.A,B,C,E - DHCP can be used to assign all tcpip related information, but an FTP server is not one of
the configurable options.
\\211. Bob is a user on your NT network, and he wants a home directory so he can store some files. How do you
give Bob a home directory?
A. User Manager for Domains is the tool you use, and all you need is the UNC path to the home directory.
212. You have 6 SCSI drives configured as a stripe set with parity. One of the drives fails, and you replace it.
What must you do to recover the failed drive?
A. Using Disk Administrator, select the new drive and choose Regenerate from the Fault Tolerance menu
\\221. Lack of disk space for spool file
A. on server, pick new location on a different drive
\\227. 3 disks, system on c:, want fault tolerance
A. tricky!! can't do ss w/p because you need 3 after system...answer is mirror
\\235. To make sure log on scripts are the same on all domain controllers....
A. Directory Replicator Service
\\241. Install GSNW...what is next
A. C.P. GSNW icon, set up shares and assign permissions
242. NT net gets new NW server...what to do
A. Install and configure GSNW, no change to clients
\\248. You have an Win NT Server that runs IPX, and you have a NetWare client. What will the client be able to
access ?
A. Client/server applications that support NetBIOS
\\249. Your Windows95 client computers access shared resources on a Windows NT Server. The Windows95
computers have Client for MS networks installed. You want to allow the Windows95 client computers to
access files on a NetWare Server. You install Gateway Service for Netware on the Windows NT Server.
What else should you do on the Windows NT Server computer to allow the Windows95 client computers
to access files on the NetWare server?
A.From the GSNW option in the Control Panel, use the Gateway option to share the desired directories
on the Netware Server.
3. You have a 386 computer with NT 3.51, and you need to upgrade to NT
4.0, How can you do it?
A. Can't do, You need at least 486/33 Mhz to run NT4.0
\\17.You want to create a roaming profile for alec, how do you do this?
Use user manager for domains to specify a UNC for the profile.
26.A printer has stopped working. It is connected to your NT Server. You want to move the spooled print files to another network printer, how?
Reconfigure the stalled printer port to the a new with the UNC name of the new printe
\\35.Which window do you use in Performance Monitor to record and save data over a period of time?
Log View
36.What program do you use to read *.dmp files?
Dumpexam.exe
42.You have a PDC called Main1. You install a member server with a share called PAYROLL. The global group ACCTMGRS from PDC need to access this share (PAYROLL). How you manage?
A: Create a local group on member server called FINANCE and add the ACCTMGRS global group into FINANCE and grant the FINANCE group permission.
\\46.Your computer is currently running MS-DOS and you would like to install Windows NT Server 4.0 using a CD. How do you do this?
Boot to MS Dos, run Winnt/b from the CD
Boot from the Setup disk (I almost overlooked this answer)
\\51.If you want your Windows NT server to run a shared Access database, what should you modify?
Server service
Q. How to make a home directory on BDC
1)Use User Manager for Domains and include full UNC path
2)Share directory and set full control permission
\\Q. You want to use Windows Sockets. Your WS s have NetBeui and TCP/IP
and so does the server. How do you configure your RAS server?
1) configure PPP for NetBeui
2) configure SLIP for TCP/IP
3) set how your users will get an ip address
7. What do you need to automated install?
A. unattend.txt, sysdiff, UDF
12. How map a Drive to a folder on the Internet?
A. \\sales.core.com\public
15. 3 Users don't get system policy working on their computers, why?
A. User policy is overriding system policy.
\\18. How to configure RAS with 2 ISDN adapters and 2 Phone numbers on each?
A. One phonebook entry with 4 phone numbers.
6) You have a PDC called Main1. You install a member Server with a shared resource called Payroll. The Global group ACCTMGRS from PDC need to access this share, how would you manage it?
Ans. Create a local group on member server called FINANCE and add the ACCTMGRS global group into FINANCE group and assign permissions.
4. DHCP gives ip address. What else - NETBIOS NODE TYPE
5. ftp work but with net use gives error - WINS configuration
6. DNS servers that use DNS root servers - CACHE
7. 7 subnets with dhcp. Give ip address of 2 dns servers to all clients -
global options
8. Workstation does not link to NT on same subnet but does broadcast to the
gateway - invalid subnet mask
9. DHCP relay to work - IP address of DHCP server
10. 2 DNS + 1 DNS to interactive queries - forwarder
11. Does not connect to web server, verify address info of DNS - nslookup
\\6.How do use NT backup
A. Specify at least one volume w/registry files in it.
\\12. How do you ensure login scripts are all kept the same
A. Use directory replicator service.
\\13When using direcory replicator service which PCs can be an
import pc
A. NT workstation, PDC, BDC, member servers
7. 3 Users don't get system policy working on their computers, why?
A. User policy is overriding system policy.
\\9. A tool to search for a value in the registry?
A. Regedit
\\10. How move workstation from one domain to another?
A. Control panel | Network | Identification.
39. You have a RAS Server and they give you an exhibit on what it and the dial in computers have. Just remember.
A. You can use Winsock (Because both have TCP/IP), You can use NetBEUI (Both have it), You can use RAS Services.
\\49. You have a 20 user workgroup called SALES. You want to install a PDC and call the domain SALES. How?
A. Create accounts for the computers on the PDC using server manager. At the workstations, Network icon. - Add to domaiN
\\51. You have a NetWare network, and install a new NT Server to run a client/server app. What must be installed on the NT
Server to allow NW clients access?
A. NWLink ONLY.
\\54. Scenario: You have RAS Dialup, some users need to access a database program over network, others do not. You want
to encrypt database information. Mix of MS Clients and 3rd party dialups. How do you maintain security?
A. Use different modem ports, configure clients who need to access the database to use the port set up with port with data
encryption.
\\55. Lack of disk space for spool file, how to fix?
A. In server properties, choose a new path for the spool file on a Disk that has more space.
1. Your Win95 computer access shared resources on Win NT server. The Win95 have client for Microsoft
Network installed. You want to allow Win95 client to access files on a NW server. You installed Gateway
Service for Netware in the WinNT server.
What else should you do on the WinNT server computer to allow the Win95 client to access files on the
Nw server ? X c. From the Gateway Service For Netware option in control panel, use the Gateway opton to share the
desired directories on the Nw server.
19. Your network has 2 Nw 3.x server , 30 Micorsoft Dos comuter and 20 Microsoft Win3.1 computer. All
client pc use Nw client software. You wnat to add NT server computer to the network. The client computer
will required access to a Netbios base client / server application on WinNT server.
Which software is needed ?
a. Client server of Netware X b. Nwlink IPX/SPX compatible transports
c. GSNW d. RIP for Nwlink
\\1 Q: You want to share a resource on a NetWare server from NT server using the GateWay. And you are located on a Win95 workstation with Client Admin Tools
From were you set up the Share?
a- from the Gateway properties
b- from the win95 Explorer
c- from the share in Server manager
d- Blah, Blah, Blah,
?????????????
\\You use Disk Administrator to create a stripe set with parity. You have
four hard disks. Each hard disk has 250 MB of free space. How much total
space will be available for data storage?
a) 250 MB
b) 500 MB
c) 750 MB
d) 1,000 MB
selected c